Paper-related settings

This item is displayed when you select Printer settings from Various settings on the HOME screen.

• Top feed paper settings

  Set the paper size and the media type of paper loaded in the top feed.

• Manual feed tray paper settings

  Set the paper size and the media type of paper loaded in the manual feed tray.

• Check paper replacement

  If you select ON, the printer detects that the paper is loaded or removed.

  When the paper registration screen is displayed after loading paper, register the paper size and the media type.

• Detect paper setting mismatch

  If you select Enable, the printer detects whether the paper size and the media type are the same as those registered. If printing starts with the settings that do not match, an error message appears on the LCD.

  • Register Paper Information

• Advanced paper settings

  Perform the following settings for each media type.

  • Paper thickness (head height)

  • Transport unit vacuum settings

  • Extension for borderless printing

  • Pause between scans

  • Pause between pages

  • Detect paper width

  • Reset paper settings by paper

  Selecting Reset paper settings for all paper, Yes and pressing the OK button initializes the settings. Entering the administrator password is required if it is enabled.

• Print advanced paper settings

  Prints out each setting specified in Advanced paper settings.

• Reset paper settings for all paper

  Initializes each setting specified in Advanced paper settings.

  Entering the administrator password is required if it is enabled.